![]() |
Confirmation of Altitude Switch - is the switch open or closed below 1000m?
Per Bentley manual, below 1000m the switch should be closed.
Can anyone confirm this to be true? Asking as I know Bentley to be incorrect sometimes. |
|
Bentley Mannual contradicting it self again.
Usually open http://forums.pelicanparts.com/uploa...1677799572.jpg |
Per the factory manual, it is open below 1000m
-Todd http://forums.pelicanparts.com/uploa...1677858527.png |
So the altitude correction box is just a switch that only makes one change at 1,000 meters or 3,280 feet. If you go higher, no additional correction.
I drove up to the Rocky Mountain National Park visitors center and it is at 12,000 feet or 3,657 meters. It felt like I was pulling a trailer and the performance really sucked. I guess the box only thought I was above 1,000 meters and I was but way above. http://forums.pelicanparts.com/uploa...1677861301.JPG |
All times are GMT -8. The time now is 03:23 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website