|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2010
Location: Where ever I am
Posts: 4,208
|
Tach Question
Am having a custom face made for my tach. Is it possible to move the turn and high beam indicators to a different location or are the light sockets fixed? Would like to move the indicators down about an inch
__________________
'86 944T black/red, chip, fuchs 8's and 9's- Sold '97 Boxster silver/red, big mistake - Sold '99 C2, silver/black, RoW M030 - sold "69 912 white w/ '86 3.2L (like the pic, just not the pic) |
||
12-10-2023, 04:20 AM
|
|
|
Registered
Join Date: Oct 2004
Location: S California
Posts: 7,966
|
The light tubes are crimped into the case, so moving them is not trivial. Moving them down an inch is not possible because the movement takes up a majority of the space in the center of the case. I'll see if I can find a picture of the inside for you. When I build custom gauges with lights in different places, I typically use internal LED in place of the standard bulbs in the light tubes.
Sent from my SM-G991U using Tapatalk
__________________
1970 911E Sportomatic Albert Blue 1971 911T Sunroof Coupe w/ Twin Plug 2.5 MFI 1973 911E Glacier Blue 1973 911E RSR Tribute Viper Green w/ 3.5 Twin Plug MFI |
||
|
12-10-2023, 05:30 AM
|
|
