Idle air bypass screw starting point

[AlKidd]

I deep cleaned my throttle body and removed all the parts while doing so. I didnt note how many turns to seated the air screw was. Is there a default starting point>

[Flat Six]

IIRC, 3.5 turns out is a good starting guesstimate.

[917_Langheck]

There are threads around this subject area, and the number I recall was between 2 and 3 full turns, mas o menos. I settled on 2.75 after cleaning the afm, resetting the afm sweep path, installing a new bypass screw, and a new O2 sensor. All vastly improved startup surging (original bypass was set at around 4.5 turns, so way lean), and off-idle bucking.

[icarp]

Are you asking a question about a hairdryer?
Please post the year and induction of your engine
Maybe even a pic of the part u r workin on

[E Sully]

His garage shows a 1983 911.

[Flat Six]

Originally Posted by E Sully

His garage shows a 1983 911.

My bad, I was assuming 3.2