|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2014
Location: Ontario Canada
Posts: 137
|
IDA 3C float level confusion
I know this has been discussed a thousand times but what gauge lines should i be using ?
I had the carbs apart and set the floats to the correct dimensions using a depth gauge and calipers, when i tested with the fluid gauge it was aligning approx. with the lower lines. The consensus seems to be the higher lines for the Webers. 
|
||
08-26-2025, 08:59 AM
|
|
|
Registered
Join Date: Mar 2006
Posts: 817
|
Depending on the vial you have, some are different.....
use the lines that are about 35mm above the center of the banjo bolt. |
||
|
08-26-2025, 09:43 AM
|
|
|
Registered
Join Date: Oct 2014
Location: Ontario Canada
Posts: 137
|
The "top" bottom line is approx. 34mm so I presume it should be set to the lower.
|
||
|
08-26-2025, 10:15 AM
|
|
