|
|
|
|
| Author |
|
|
Kolibri
|
Zenith Watershed Install question?
I bought the watershed k&n combo from PP for my Zenith equipped 70T.
Well, I am at the point where I need to put the pan together. My quesion is this. The installation instructions do not show the velocity stack going back in. I am assuming that they do go back in, but who knows. You guys do! Here's a picture of my pretty wife ! You like? Thanks Michael 
__________________
1942 VW Kübelwagen 1940 Zündapp KS 600 1941 Zündapp KS 750 1975 Volvo C303 TGBII 1967 Honda S90, 1975 CB550 |
||
11-21-2003, 07:49 AM
|
|
|
Registered
Join Date: Nov 2003
Location: Littleton, CO
Posts: 78
|
Michael, the velocity stacks will be reinstalled on the top of the filter plate which mounts to the carburetor top. Basically just as they were when the car had the stock air filter with the "Buckets" on top of each carb.
Good Luck! Pat
__________________
87 944S Black/Black Club Racer 87 944 Kalahari Beige/Brown Daily Driver 82 911SC Platinum Metallic/ Brown Garage Queen |
||
|
11-21-2003, 10:07 AM
|
|
Yellow
