|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2001
Location: Orlando, FL.
Posts: 255
|
CV Axle compatability
Can I replace the CV axles on my 1977 2.7 Litre 911S with those from my 1974 2.7 Litre 911. I would hate to buy a re-built unit only to find that I had a compatible spare. This is for a weekend fun cruiser, not a racer.
If you read this post Colin, I did your test and it wasn't the bearing. (No rumbling in reverse). |
||
01-19-2004, 10:08 AM
|
|
|
Registered
Join Date: Jul 2001
Location: Springfield, MO
Posts: 1,422
|
The ones from my '74 interchange with my '75. My best guess is to hold them up next to each other and take a look at the situation.
Good luck, David Duffield |
||
|
01-19-2004, 10:10 AM
|
|
|
Registered
Join Date: Dec 1999
Location: TX USA
Posts: 9,804
|
NOPE!!!
In mid-75 the CV-joints [and flanges] changed from four M10 Allen bolts to six M8 Allen bolts!
__________________
Warren Hall, Jr. 1973 911S Targa ... 'Annie' 1968 340S Barracuda ... 'Rolling Thunder' |
||
|
01-19-2004, 10:24 AM
|
|
|
Registered
Join Date: Aug 2001
Location: Orlando, FL.
Posts: 255
|
Thanks S_Man,at least I won't feel like a dope when I order the new ones.
__________________
1957 KR 200 Messerschmitt Bubble Car 3 wheeler-my first rear engined air cooled German car,alas long gone!. 1977 911S 2.7 to spend money on 2006 Tundra for acting grownup |
||
|
01-19-2004, 11:28 AM
|
|
