Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Black and Blue
 
Kemo's Avatar
 
Join Date: Jul 2000
Location: Austin, TX USA - Ya'll
Posts: 2,552
Send a message via Yahoo to Kemo
Quick question on setting timing...

I have seen numerous posts here for timing suggestions, at least for my SC...and it usually goes something along the lines of 5deg BTDC at 1K-RPM no more than 35deg BTDC at 6K-RPM.

my question is this...why even worry about the idle timing? Just set the timiming at 35Deg at 6K then adjust the idle down to 950K...am I being too simplistic here? Why even check at 1K?

as usual, any comments are greatly appreciated.

__________________
Kemo
1978 911 SC Non-Sunroof Coupe, two tone Primer Black and SWEPCO Blue, Currently serving as a Track Whore
1981 911 SC Sunroof Coupe, Pacific Blue Project, Future Daily Driver
Old 03-05-2004, 06:50 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
kstylianos's Avatar
 
Join Date: Nov 2002
Location: Arlington, VA
Posts: 1,045
Send a message via Yahoo to kstylianos
Nope, not being too simplistic IFF you know that your vacuum and mechanical advance are working correctly.....setting total advance at 35BTDC then bringing idle back down is fine.

If you initially set to factory specs of 5BTDC and then check total advance, it should advance to ~28-30BTDC @6K. Also, the timing should advance in some sort of smooth linear fashion, not instant. If you are not getting 28-30 degrees @6K, your mechanical or vacuum advance may be faulty. So, if you then set timing to 35, the idle/low rpm timing will be too advanced causing low rpm detonation under load. What if the advance were to 'unstick' at high rpm's...then you'd be way too advanced up high causing possible detonation etc....

Not a bad idea to check both idle and total advance to make sure you have the 'total curve'.
__________________
Charlie Stylianos
1982 SC Targa
www.Dorkiphus.com - (The Land of the NoVA/DC/MD Porschephiles)
Old 03-05-2004, 10:13 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Black and Blue
 
Kemo's Avatar
 
Join Date: Jul 2000
Location: Austin, TX USA - Ya'll
Posts: 2,552
Send a message via Yahoo to Kemo
ok...thanks...that clears that up! BTW..i love the if-and only-if... LOL
__________________
Kemo
1978 911 SC Non-Sunroof Coupe, two tone Primer Black and SWEPCO Blue, Currently serving as a Track Whore
1981 911 SC Sunroof Coupe, Pacific Blue Project, Future Daily Driver
Old 03-05-2004, 10:18 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
kstylianos's Avatar
 
Join Date: Nov 2002
Location: Arlington, VA
Posts: 1,045
Send a message via Yahoo to kstylianos
LOL...yeah, you got to throw that in sometimes......

__________________
Charlie Stylianos
1982 SC Targa
www.Dorkiphus.com - (The Land of the NoVA/DC/MD Porschephiles)
Old 03-05-2004, 10:29 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Reply


 


All times are GMT -8. The time now is 03:42 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.