|
|
|
|
| Author |
|
|
Registered
Join Date: Mar 2004
Location: S.E. Pennsylvania
Posts: 1,967
|
Head Temp Tool
Well from taking the advice from folks here on this site re: the CHT Tool...I got the 14mm deep socket and went to a machine shop and had a groove machined in. The results were excellent...
  Thanks folks for the advice.....
__________________
The Fox Carrera |
||
05-20-2004, 10:15 AM
|
|
|
Now in 993 land ...
|
Geez, you don't own a grinder???
 Nah, I understand you want a NICE tool for your 911! George |
||
|
05-21-2004, 12:26 AM
|
|
|
Registered
Join Date: Mar 2004
Location: S.E. Pennsylvania
Posts: 1,967
|
Yea, yea, yea...I know.....
For a total of $3.00 for the socket and $2.00 to have it machined....I couldn't refuse.
__________________
The Fox Carrera |
||
|
05-21-2004, 05:53 AM
|
|
|
UFLYICU
|
The gap looks a little too narrow, KQW. I had to grind it several times before it would fit around the heat shrink on the sensor. The cable coming out of the sensor is pretty thick.
__________________
_______________________ Racer Rix Spec911 #5 prc-racing.com |
||
|
05-21-2004, 05:30 PM
|
|
Track Whore
New Daily Driver
Former Daily Driver
