Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   911 engine swap roll call (http://forums.pelicanparts.com/porsche-911-technical-forum/169890-911-engine-swap-roll-call.html)

jhelgesen 06-29-2004 05:32 AM

1976 912e
1979 sc 3.0, euro cis

http://forums.pelicanparts.com/uploa...1088512311.jpg
http://forums.pelicanparts.com/uploa...1088512352.jpg

MuffinMan 06-29-2004 05:59 AM

Add another 3.6 conversion to the list:

1977 911S
1997 3.6 Varioram engine
Factory 993 heat exchangers with Triad muffler

Link to my conversion project/progress thread

Heat routing for Triad muffler

Dyno results (with video link)


(the only engine pic I had handy was before everything was finalized)

http://forums.pelicanparts.com/uploa...1088513868.jpg

http://forums.pelicanparts.com/uploa...1088513883.jpg

Silveresrty911S 06-29-2004 05:59 AM

77 w/3.2
 
'77 targa with 3.2 US, wong chip and euro pre-muffhttp://forums.pelicanparts.com/uploa...1088513964.jpg

tholyoak 06-29-2004 07:23 AM

1990 3.6 (with 993 intake and exhaust and Thom's sexy carbon fibre tube) into 80 SC Targa

http://forums.pelicanparts.com/uploa...1088518928.jpg

speedo 06-29-2004 07:28 AM

'73 coupe...RS conversion
'79 3.0 w/ SSIs...2-in-1-out
Iris Blue...chrome blacked out
Pics coming....:D

Paul Thomas 06-29-2004 07:41 AM

1970 T with dual-plug 3.5 MFI
Lame-ass-cams soon to be replaced with RSR cams.

http://forums.pelicanparts.com/uploa...1088520022.jpg

http://forums.pelicanparts.com/uploa...1088520100.jpg

ttweed 06-29-2004 08:35 AM

1973 911E originally, came to me with a stock 1980 3.0 SC engine and tranny already in it. I upgraded the suspension and added RS bits and ran it for a couple of years until I had a mis-shift at WSIR and bent valves. Swapped in a 3.4 based on a 3.2 case and crank with new 98mm Mahle Sport 10.3:1 pistons and cylinders, Carrillo racing rods, special "Otto-grind" WebCams, Aase Bros. racing valve springs, and PMO 50mm carbs. Put 930 brakes on it and rebuilt the 915 with billet intermediate plate and GT diff.

http://members.rennlist.com/tweedt/springmount.jpg
http://members.rennlist.com/tweedt/3_4motor.jpg

chuckw951 06-30-2004 09:34 PM

No other transplants? Bump

cowtown 06-30-2004 09:43 PM

'75 911S (stripped out) with stock '77 930 engine (euro setup). 2250lbs, 260HP. :D
http://forums.pelicanparts.com/uploa...1084727394.jpg

Adelgigs 07-01-2004 12:56 AM

I bought my '81SC with a stuffed motor and had to do the rebuild with very little knowledge. My build is documented here www.adelgigs.com/911enginerebuild.htm

Enjoy.

chuckw951 07-10-2004 09:19 AM

Bump. I know there are more hotrods here.

http://forums.pelicanparts.com/uploa...1089476355.jpg

rennch 07-10-2004 10:40 AM

http://whirledmedia.com/newnumbers/n...s-Images/0.jpg

72 911 T w/79 3.0 SC engine. Early Exhaust/muffler.
Getting all dorked up for SCCA A Street Prepared competition.

petevb 07-10-2004 10:47 AM

-70 non sunroof coupe, welded cage
-89 3.2l with headers, etc
-double adjustable JRZ coilovers, TRG swaybars, no rubber bushings
-915 w/ wevo gateshift, shifter, GT diff
-S4 brakes under 8/9 x 16 fuchs
-2200 lbs, 224 rwhp

It’s good fun…
http://forums.pelicanparts.com/uploa...1089481632.jpg

Todd Simpson 07-10-2004 01:19 PM

-71 non sunroof coupe, welded cage
-84 Euro 3.2l, SSI's, sport muffler
-22/28's, hard bushings, etc.
-early 7/31 915
-Carrera/SC brakes under 8/9 x 16 fuchs
-2200 lbs, 207 rwhp

http://forums.pelicanparts.com/uploa...1089490751.jpg

Bill Verburg 07-10-2004 04:20 PM

Some nice rides here!

Mine
http://forums.pelicanparts.com/uploa..._006_small.jpg

http://forums.pelicanparts.com/uploa..._008_small.jpg

http://forums.pelicanparts.com/uploa...1089283461.jpg

http://forums.pelicanparts.com/uploa...1089501464.jpg

http://forums.pelicanparts.com/uploa...1089501514.jpg


'76 Carrera 3.0 w/ 993 3.8 RS, 915/67/lsd, 993RS brakes, Ruf bumpers, Kinesis 8&9.5x17, 235.45 7 275/40 tires.

Az911 07-10-2004 04:50 PM

Year: 1972
Model: 911T
Engine: 1980 3.0


http://forums.pelicanparts.com/uploa...1089503377.jpg

Az911 07-10-2004 04:58 PM

Quote:

Originally posted by petevb
-70 non sunroof coupe, welded cage
-89 3.2l with headers, etc
-double adjustable JRZ coilovers, TRG swaybars, no rubber bushings
-915 w/ wevo gateshift, shifter, GT diff
-S4 brakes under 8/9 x 16 fuchs
-2200 lbs, 224 rwhp

It’s good fun…
http://forums.pelicanparts.com/uploa...1089481632.jpg

I remember this car. It was very fast out on the track even before all the crazy suspension was put in. Were is the car at now?

petevb 07-10-2004 05:04 PM

Imported to the SF bay area from AZ. It took a while to get the coilovers sorted by it's working well now...

Az911 07-10-2004 05:10 PM

Have anymore pics of it?

Rufblackbird 07-10-2004 05:15 PM

I don't consider this a hotrod...but oh well.

'72 911T Targa w/ '78 California SC motor, K&N filter :D, 964 turbo look...that's all I know. Plans for a backdate and conversion to Speedster with MFI motor in the works...well...as soon as I pay off the car first.

http://www.paradiseads.com/images/dsc02004s.jpg


All times are GMT -8. The time now is 08:15 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.