|
|
|
|
| Author |
|
|
Registered
|
Pertronix Part Number if any
The previous owner swapped the Marelli for a Bosch distributor a while ago. Good.
Part number is 0 231 159 001 which I believe was used in 67 Ts. I'd like to take the points away, and switch preferably to a Pertronix Ignitor, to keep the look as original as possible in the engine bay (and let me tell you...it is original so far...35 years of dust...oil projection...) The thing is I can't find the Ignitor that will suit for sure this distributor. Does anybody know if any the parts offered by Pelican (PN 1867 or 1863) are suitable for this distributor? Is there another PN that is designed specifically for this distributor? Thanks for any tip!
__________________
ZeFreds 1969 911T - Daily driver "La Titine" Bought on the following condition from my wife "Do NOT let it sleep in the garage...you have to drive it EVERYDAY!"...I love my wife! |
||
07-08-2004, 08:53 AM
|
|
|
Registered
Join Date: Jul 2002
Location: Cali
Posts: 1,887
|
Pertronix just started making a unit for the early distributors. Call our host, they might know the part number or call Pertronix directly. They will tell you.
I just had one put in my early distributor but I do not remember the part number.
__________________
Mark Scott Vintage 911 Racer 1967 911S 2.4L ROCKET Powered by Faragallah! www.scottassociatesracing.com |
||
|
07-08-2004, 11:31 AM
|
|
|
Registered
|
Thanks Mark
Just called Pertronix. They told me they don't have anything for this distributors in their drawers... I will try to fine tune my skills at setting dwell and timing...
__________________
ZeFreds 1969 911T - Daily driver "La Titine" Bought on the following condition from my wife "Do NOT let it sleep in the garage...you have to drive it EVERYDAY!"...I love my wife! |
||
|
07-08-2004, 02:12 PM
|
|
