Need body diagrams and advice..

[audi2.7t]

Hi guys, I need a diagram of the rear structure... specifically the rear crossmember that the hood closes on and the channel below that (behind bumper) and the engine mount supports. I've finally figured out that the right side is tweaked about 1/2" from the old collision and it might be easier to replace everything than repair it before paint. Any input welcomed and appreciated .
thanks,
Sam.

[audi2.7t]

Anybody ?, it's for an '88 and Pelicans diagrams only go to '83.. heuuulp..

[djmcmath]

You mean like this?



This pic came from the parts CD, available from our host. If you're going to get serious about a project like this, I can only recommend that you obtain such a CD. It's worth its weight in gold for moments like this one: rather than saying "No, that's not it, I need the collection of parts from blah-blah," and then eventually, "Yes yes! I need part numbers for the bits labeled 6, 12 , 13, 42, and 126," you can just look them up locally. It's a real feeling of empowerment, now that schmucks like me can now legally own the parts-disc.

Dan

[audi2.7t]

Dan, thanks but that's not whay I'm looking for, I need the diagrams for the actual body panels and sub-structure ie. the rear cross member, engine mounting points and reinforcements.
thanks though,
Sam.