|
|
|
|
| Author |
|
|
Too big to fail
|
Free beer!
I need to borrow a rear window and seal, and a quarter window and seal for some last minute test fitting in my fiberglass hardtop before I send it out to have a mold made.
If someone in the greater Sacramento area could lend me a set for an afternoon, I'll fill your belly with beer. Thanks!
__________________
"You go to the track with the Porsche you have, not the Porsche you wish you had." '03 E46 M3 '57 356A Various VWs |
||
01-15-2005, 09:41 PM
|
|
|
Registered
Join Date: Oct 2000
Location: Nor-Cal
Posts: 4,403
|
Thom, I'm not in the Sac area, but your welcome to come up and borrow the ones out of my SC (since it's on jack stands for a while).
|
||
|
01-16-2005, 04:35 AM
|
|
|
Registered
Join Date: Oct 2004
Location: Memphis TN
Posts: 573
|
Thom, how 'bout an update on the mold? do you have a price yet?? thanks
__________________
ELVIS 84 CAB -SOLD |
||
|
01-16-2005, 04:37 AM
|
|
|
Too big to fail
|
The top is almost ready to be sent out for molding. I have - no kidding - about 100 hours into prepping this thing. I shot some surfacing primer on it tonight, and tomorrow I get to start filling in the zillion pinholes. Yay! I re-worked a few parts of the top because I didn't like the way it came out originally. I really want to test fit a set of windows into it before I send it out; I may suck it up and pick up a set at the junkyard, and then flip them on the used part section when I'm done with them (ie lose my a$$ on them) More pix @ http://rennlight.com/gallery
I won't have a firm price until the first unit is popped out of the mold and readied for consumption.  
__________________
"You go to the track with the Porsche you have, not the Porsche you wish you had." '03 E46 M3 '57 356A Various VWs |
||
|
01-16-2005, 06:14 PM
|
|
