|
|
|
|
| Author |
|
|
Registered
Join Date: Feb 2004
Location: Houston
Posts: 1,486
|
What glue to use?
I will be putting the door seals in this weekend.
Also some of the vinyl on the door pillars and the windshield frame. Can anyone tell me what kind of glue to use in the two spots? I figure it is two types of glue, one for the seals and one for the vinyl Thanks Derek 
__________________
Derek Oxford PCA - Nationally Certified Instructor 2002 Boxster S ( race car) 2010 LR4 2009 GMC Sierra (Porsche Support 2011 M3 4Door |
||
01-26-2005, 06:22 PM
|
|
|
Registered
|
Door Seal Glue
I used a weather stripping glue from 3M. Good stuff, think it was recommended from other on the board. Only complaint I have is that the stuff I bought is an off orange color that stands out if you have any excess around the edges. Not sure if they make a clear or black.
Gordo
__________________
Don "Gordo" Gordon '83 911SC Targa |
||
|
01-26-2005, 06:40 PM
|
|
|
Friend of Warren
Join Date: Oct 2000
Location: Lincoln, NE
Posts: 16,492
|
For the vinyl use 3M Super Spray Adhesive. Get the highest number you can find, either 85 or 90. For the weather strip get 3M weather strip adhesive. The stuff I use is black. Comes in a tube. Most auto parts stores carry both.
__________________
Kurt V No more Porsches, but a revolving number of motorcycles. |
||
|
01-26-2005, 06:42 PM
|
|
|
Air Medal or two
Join Date: Jul 2003
Location: cross roads
Posts: 14,078
|
Napa sels it in black BTDT
__________________
D troop 3/5 Air Cav,( Bastard CAV) and 162 Assult Helicopter Co- (Vultures) South of Saigon, U Minh Forest, Delta, and all parts in between |
||
|
01-26-2005, 06:43 PM
|
|
|
Registered
Join Date: Feb 2003
Location: Petaluma - San Francisco Area
Posts: 555
|
The 3M Rubber Seal glue comes in black and works great.
__________________
PorschePilot 74 911S Targa - High Quality 2.7 Rebuild and Full Body Restoration MID9 Member Beechcraft V-Tail Bonanza (Fly'n high and low) |
||
|
01-26-2005, 07:00 PM
|
|
