|
|
|
|
| Author |
|
|
Registered
Join Date: Feb 2005
Location: uk
Posts: 5
|
CV joint sizing
Hi, I'm trying to match up 944 driveshafts to a 1968 901 gearbox.
The output flanges on the 901 measure around a 76 pcd x 6 bolts and up to 90mm outer dia. Does anyone have one of these joints that could measure the diameter and number of splines on the drive shaft, as I wondering if the 911 cv will fit on the 944 driveshafts I have. If this is not an option, I will have to change the output flanges on the gearbox to match the 944 CV's which are 100mm dia and 86 pcd x 6 bolts. Does anyone know what year/model output flanges I would need? 
Last edited by nealm27; 02-11-2005 at 04:06 AM.. |
||
02-11-2005, 03:54 AM
|
|
|
Registered
|
Why not post this question in the 944 tech forum? You may have better results...
__________________
If it flows, it goes. If its smooth, it moves. Any questions? 96 993 C2 (Current) 87 911 Factory Turbo-Look Cab (Sold) 85 911 Factory Turbo-Look Targa (Gone) |
||
|
02-11-2005, 06:51 AM
|
|
|
Registered
Join Date: Feb 2005
Location: uk
Posts: 5
|
Thanks, I'll give that a try
|
||
|
02-11-2005, 07:13 AM
|
|
1987 Porsche 911 3.2
