Where to buy Garrett04e turbo?

[kodabear]

Anyone know a good place to buy a new t04e suitable for a carrera turbo conversion?

[Wil Ferch]

No affiliation, but how about here-->

http://www.optionimports.com/gatu.html

- -Wil

[Mike Bonkalski]

Another link, again no affiliation:

Phoenix Turbo - http://store.yahoo.com/cheapturbo/index.html

[350HP930]

This is the cheapest source I found for the GT series garrett I am getting, but I am not sure how competitive they are when it comes to T4/T3s.

http://www.pagparts.com/perfpts1.asp?pprd=gtturbo&cat=sportt3t4

[jriera]

Dumb question of the day:

Can someone tell me the sizes (inducer size, flow, thrust bearing, etc) for a 'standard' '84 930 turbo (no, I do not have an standard turbo)

Thanks

[350HP930]

A K27, a popular 930 upgrade turbo has the following approximate dimensions.

Compressor - 3" wheel, 2.1" inlet, 50 trim, ~0.9 A/R
Turbine - 3" wheel, 2.55" outlet, 70 trim 0.8 A/R

These numbers are from measurements I made of my turbo so they could be a little off.

[kodabear]

Originally posted by 350HP930
A K27, a popular 930 upgrade turbo has the following approximate dimensions.

Compressor - 3" wheel, 2.1" inlet, 50 trim, ~0.9 A/R
Turbine - 3" wheel, 2.55" outlet, 70 trim 0.8 A/R

These numbers are from measurements I made of my turbo so they could be a little off.

Are those for a k27-7200, 11/11, or 7006?

Alsowhich garrett GT did you go with?

[YermanCars]

To4b .58 o trim would be great that is what I ran and got 360wrhp on .7bar

[kodabear]

Originally posted by YermanCars
To4b .58 o trim would be great that is what I ran and got 360wrhp on .7bar

Who did you get the T04B from?

[island911]

Originally posted by YermanCars
To4b .58 o trim would be great that is what I ran and got 360wrhp on .7bar

Interesting. hmmmm. ...
I happen to have a T04, that I bought waaay-back, around 1981. (sitting in a box since then) T0457 is the complete model number. I have both the .58 & .40 trim.

A few years ago I saw this exact turbo in some 1975-vintage porsche literature on turbo'ing the carrera . .. before the production turbo hit the market. So, I know it must work . ... but very old-school.

So, what's it worth?

[island911]

picts . . .cobwebs and all

[350HP930]

Originally posted by kodabear
Are those for a k27-7200, 11/11, or 7006?

Also which garrett GT did you go with?

Its a 7006 and I am upgrading to a GT37.

[ssetek]

Originally posted by 350HP930
This is the cheapest source I found for the GT series garrett I am getting, but I am not sure how competitive they are when it comes to T4/T3s.

http://www.pagparts.com/perfpts1.asp?pprd=gtturbo&cat=sportt3t4

the sc series pte turbos are great and i use them all the time but they are not a gt based turbo the still use the t31 turbine wheel they do make a gt based turbo like a gt35e which is a sc61 on the cold side and a gt based on the turbine side.

[350HP930]

Originally posted by ssetek
the sc series pte turbos are great and i use them all the time but they are not a gt based turbo the still use the t31 turbine wheel they do make a gt based turbo like a gt35e which is a sc61 on the cold side and a gt based on the turbine side.

I posted their hybrid page since thats what was being asked about. Their GT turbos are on the following page.

http://www.pagparts.com/perfpts1.asp?pprd=gtturbo&cat=gtturbo

[kodabear]

Originally posted by ssetek
the sc series pte turbos are great and i use them all the time but they are not a gt based turbo the still use the t31 turbine wheel they do make a gt based turbo like a gt35e which is a sc61 on the cold side and a gt based on the turbine side.

What turbo would you recommend for this setup? Looking forward to getting the chip from you.

Jon

[ssetek]

Originally posted by 350HP930
I posted their hybrid page since thats what was being asked about. Their GT turbos are on the following page.

http://www.pagparts.com/perfpts1.asp?pprd=gtturbo&cat=gtturbo

that link has garret gt turbos not pte turbos but the gt series is a big improvement over the t series turbine wheels