|
|
|
|
| Author |
|
|
Registered
Join Date: Feb 2002
Location: DTX
Posts: 2,409
|
B&B special header tool in NYC/ Long Island?
I'm looking for the offset wrench that B&B supplies with its headers, to get at the exhaust nuts. If you have one in NYC or Long island, I'd very much appreciate borrowing it. I can offer a six-pack of your favorite beer, or my everlasting gratitude. I'm willing to bet the beer is a more interesting offer.
Anyway, I'm looking to put these headers on over thanksgiving, out on the east end of long island. I am in NYC, so any point between here and there is good for a pickup/dropoff. Thanks
__________________
89 Carrera 3.4 "There is a right way to go around a corner - it's called the line." -- PCA DE speaker bryteside.com - good things happen. |
||
11-14-2005, 11:05 AM
|
|
|
Registered
Join Date: Nov 2000
Location: New York
Posts: 1,092
|
B&B tool
I had this tool somewhere in my garage, I will check and let u know, no promises though
__________________
http://www.mybuildgarage.com/author/carreraboy |
||
|
11-14-2005, 12:21 PM
|
|
|
Registered
Join Date: Feb 2002
Location: DTX
Posts: 2,409
|
Thanks, I appreciate your looking.
Anyone else?
__________________
89 Carrera 3.4 "There is a right way to go around a corner - it's called the line." -- PCA DE speaker bryteside.com - good things happen. |
||
|
11-16-2005, 05:39 AM
|
|
|
Registered
|
Header tool.....
I have the special tool that comes with the SSI headers. Will that work? One thing you need to check is the header nut size. The originals require a 13mm wrench but the later copper alloy nuts use a 12mm size wrench. If you are going back with the 13mm size nuts, I will send you the SSI wrench. Just let me know what you decide. I'll send you a PM with my email address.
__________________
FEC3 1980 911SC coupe "Zeus" 3.3SS god of thunder and lightning |
||
|
11-16-2005, 06:45 AM
|
|
Zeus (god of thunder and lightning)
