Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Sep 2005
Location: Northern Virginia
Posts: 1,792
Blaupunkt Knob Fix

My Blaupunkt (my son pronounces it Blau-punk-it) suffered from a loose on-off/volume knob. Thus, to turn the radio on or off, I had to remove the knob to turn the shaft.

What happens is the plastic retainer inside the rubber knob cracks and loses its strength.

Knowing that an older Blaupunkt replacement knob is probably nearly the cost of the radio, I figured out a cheaper fix. I mixed up a small batch of laminating epoxy and microballoons (building and flying model airplanes definitely helps in the world of keeping older Porsches alive and well) and applied it to the center of the knob. I then coated the shaft the knob slips onto with vaseline (you don't want to permanently glue the knob on -- you just want to restore the knob back to where it can correctly grip the shaft).

Once that was done, I pressed the knob on and let it sit overnight. Works great now and the knob can be slipped on and off.

Old 11-21-2005, 05:54 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply


 


All times are GMT -8. The time now is 05:30 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.