|
|
|
|
| Author |
|
|
Registered
|
H4/bucket installation question
Well, Got everything painted & put the left/passenger side on with no problems. Now to the drivers side. I put it on & it seems to be a bit askew. After looking at the H4 assembly & bucket in the fender I realized that the bucket on the fender is about an 1/2 inch off center. I know it's not the end of the world but it will drive me crazy to have that light skewed 1/2". Anyhew, there is a single bolt in the bucket. Is this the only screw holding the bucket in place?
__________________
Tom Hutchinson 80 Targa / 81 Coupe / 71 Targa (in Porsche heaven) My Garage Build: https://youtu.be/H0n_NwEQVbs "If one does not fail at times, then one has not challenged himself." Ferdinand Porsche |
||
02-26-2006, 09:55 AM
|
|
|
Registered
|
bbt
__________________
Tom Hutchinson 80 Targa / 81 Coupe / 71 Targa (in Porsche heaven) My Garage Build: https://youtu.be/H0n_NwEQVbs "If one does not fail at times, then one has not challenged himself." Ferdinand Porsche |
||
|
02-27-2006, 03:26 AM
|
|
|
Registered
Join Date: Feb 2000
Location: London, UK
Posts: 2,349
|
I'm afraid not - the headlamp bucket is welded into the fender.
__________________
Andy M&W 904 ... now gone GT-style 356C ... also gone |
||
|
02-27-2006, 09:12 AM
|
|
Porsche
