Mounting Bar and Plate Torque Values
 

Anyone know the torque values for the engine mounting bar at the rear of the engine? I have read Wayne's book and searched posts but am not seeing it. Also, the mounting bar attached to a mounting plate that mounts over the diveshaft pulley. This has 4 bolts? What are the required torques for these?

Thanks in advance.
Rick

The Bentley manual states the large mounting bolts should be 58ft lbs.

The bolts attaching the motor plate to the engine are ,I believe, 18 ft lbs.
(I don't have the manual with me to be 100% positive on these, though)

What year 911 is it?

That's right. 80 Nm (~58 ft-lb) for the big bolts on the ends and 30 Nm (~22 ft-lb) for the middle four.

Hey, that's pretty good for not looking.:)
thanks for the backup, KTL.

It's a 1983 SC. Thanks for the information guys.
Rick