![]() |
|
|
|
Registered
|
Mounting Bar and Plate Torque Values
Anyone know the torque values for the engine mounting bar at the rear of the engine? I have read Wayne's book and searched posts but am not seeing it. Also, the mounting bar attached to a mounting plate that mounts over the diveshaft pulley. This has 4 bolts? What are the required torques for these?
Thanks in advance. Rick |
||
![]() |
|
Registered
Join Date: Oct 2003
Location: Michigan
Posts: 14,093
|
The Bentley manual states the large mounting bolts should be 58ft lbs.
The bolts attaching the motor plate to the engine are ,I believe, 18 ft lbs. (I don't have the manual with me to be 100% positive on these, though) What year 911 is it?
__________________
1981 911SC ROW SOLD - JULY 2015 Pacific Blue Wayne |
||
![]() |
|
Schleprock
Join Date: Sep 2000
Location: Frankfort IL USA
Posts: 16,639
|
That's right. 80 Nm (~58 ft-lb) for the big bolts on the ends and 30 Nm (~22 ft-lb) for the middle four.
__________________
Kevin L '86 Carrera "Larry" |
||
![]() |
|
Registered
Join Date: Oct 2003
Location: Michigan
Posts: 14,093
|
Hey, that's pretty good for not looking.
![]() thanks for the backup, KTL.
__________________
1981 911SC ROW SOLD - JULY 2015 Pacific Blue Wayne |
||
![]() |
|
Registered
|
It's a 1983 SC. Thanks for the information guys.
Rick |
||
![]() |
|