Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Blizzard
Guest
 
Posts: n/a
Front end height

My 1984 Targa is raked forward - the front end is definitely lower than the rear end. I am always scraping the front end. Should the rocker panels be parallel to the ground? If so, what can I do to raise the front? My car has the stock wheels and tires. You can see a picture of the car at (www.force-1.com/images/dcp00305).

------------------
1984 Targa

[This message has been edited by Blizzard (edited 09-24-2000).]

Old 09-24-2000, 12:25 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
JackOlsen
Guest
 
Posts: n/a
Oops. Double post.

[This message has been edited by JackOlsen (edited 09-24-2000).]
Old 09-24-2000, 02:42 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
JackOlsen
Guest
 
Posts: n/a
I'll quote from a previous post by Mark isaak:

Quote:
I was just reading Pano from 7/00 and in the Tech Q&A Bruce Anderson answered a question on lowering a 911. It is a very detailed and logical description of the process. He also gives a rule of thumb for height of car at fender lip. (25 inches in the rear and 25.5 inches in the front) He says this will give a "very slight nose down attitude".
Hope that helps.



------------------
Jack Olsen
1973 911 T sunroof coupe

[This message has been edited by JackOlsen (edited 09-24-2000).]
Old 09-24-2000, 02:43 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
stlrj
Guest
 
Posts: n/a
Two clockwise turns of the 11mm torsion bar adjusting screw on both sides equally should bring it up about 1/2".

Old 09-24-2000, 02:45 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Reply


 


All times are GMT -8. The time now is 12:25 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.