![]() |
|
|
|
Registered
Join Date: May 2005
Location: Austin, TX
Posts: 909
|
SC distributor to coil wire is shorting out
On my 82 SC I just discovered that the wire from the distributor to the coil is damaged (photos below). If the metal braid from one of the plug wires gets close it arcs across. Is there any thing "special" about this wire? Can I make a new one myself?
I pulled gently on the end going in to the distributor, the boot didn't budge. So how to get this appart? Thanks in advance Jay ![]() Don't worry about that razor blade..... I'm not desperate.... yet. ![]()
__________________
2002 Boxster Speed Yellow |
||
![]() |
|
Registered
|
Jay
Take your choice-- tape the damaged area, or go to Auto Zone or the like and pick up a new coil wire. I myself wouldn't go through the trouble of making one.
__________________
----------------------------- Ernie 81 SC |
||
![]() |
|
Less brakes, more gas!
|
Or you could buy a set of Magnacore wires and change everything out... That is what I did when I found my coil wire virtually cut in half... I truly have no idea how the car drove! I was just mucking about one day and there it was, sheared in half...
-michael
__________________
![]() ![]() '82 Euro SC 'Track Rat' 22/29 Hollows, 22/22 Tarrets, Full ERPB F/R, Rennline Tri Brace, Glass bumpers, Pro 2000's, 5 pts, blah blah blah '13 Cayenne GTS |
||
![]() |
|