|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2005
Location: Between Detroit and Toledo
Posts: 117
|
Spark plug wires??
I just got the Clewett engineering spark plug wires from our host. I noticed they do not have the ground wire on them like some of the others on the website. Am I missing something or is the ground wire for the steel braid covering on the other wires? Cheers, Mike.
__________________
1981 911 SC Black / Black & Tan sunroof coupe. Run like the wind...straining the limits of machine and man... (Peart) Last edited by m_wuebben; 03-31-2007 at 08:32 AM.. |
||
03-30-2007, 08:43 AM
|
|
|
Registered
Join Date: Jun 2005
Location: San Diego
Posts: 619
|
The ground wire is for the steel braid.
Hope this helps, Shawn |
||
|
03-30-2007, 10:24 AM
|
|
|
Registered
Join Date: May 2001
Location: Peoples Republic of Long Beach, NY
Posts: 21,140
|
many guys around here run wires without the grounded steel covering.
__________________
Ronin LB '77 911s 2.7 PMO E 8.5 SSI Monty MSD JPI w x6 |
||
|
03-30-2007, 10:44 PM
|
|
|
Registered
Join Date: Dec 2005
Location: florida
Posts: 78
|
I went w/ nonbraided wires awile back,after consulting this board.
perf. is great. |
||
|
03-31-2007, 05:40 PM
|
|
|
Registered
Join Date: May 2001
Location: Peoples Republic of Long Beach, NY
Posts: 21,140
|
i used the wire spacers as it became moving from stock to a nice install even though i don't max load them with much bigger spark plug gaps and compression.
8.5 is a nice size imo
__________________
Ronin LB '77 911s 2.7 PMO E 8.5 SSI Monty MSD JPI w x6 |
||
|
03-31-2007, 06:34 PM
|
|
