|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2005
Posts: 294
|
Engine stand hole spacing?
I ordered this engine stand today and I would like to find out the mounting hole spacing so I can build a roll around base and have it ready when it arrives. Could someone take some measurements of theirs and pass them along? It would be a big help.
http://www.pelicanparts.com/catalog/shopcart/911L/POR_911L_TOLtol_pg1.htm# Here is the part number: PEL-TOL-SIR313 Thanks, Bob Last edited by Bullet Bob; 08-13-2007 at 09:33 PM.. |
||
08-13-2007, 09:30 PM
|
|
|
Less brakes, more gas!
|
Just curious, are you mounting it to a bench as well? If so, how will you ensure it does not fall over/pull out of what ever you mount it to etc etc etc??
Thanks, Michael
__________________
 Michael '82 Euro SC 'Track Rat' 22/29 Hollows, 22/22 Tarrets, Full ERPB F/R, Rennline Tri Brace, Glass bumpers, Pro 2000's, 5 pts, blah blah blah '13 Cayenne GTS |
||
|
08-14-2007, 02:27 PM
|
|
|
Registered
Join Date: Oct 2005
Posts: 294
|
I plan to build a normal engine stand with four wheels and at the top there will be a plate with holes drilled for attaching this unit. The unit will be made from steel and welded together like this:
TOL-OTC2012 |
||
|
08-14-2007, 02:45 PM
|
|
|
Registered
Join Date: Jan 2005
Location: KENDAL,CUMBRIA, UK
Posts: 1,580
|
HI Bob do not skimp on the thickness of the mounting, like this;
 the size is ;8.5/8"x 11.3/4"x 3/8 thick, the hole spacing is 170mm across x 140mm lengh  the reason for the bit at the back is some where to put tools/parts/magnetic bit's tray  if you make a stand like this you can then bolt to the floor, or make a mobile stand to fit the base out of 3 sections of box. regards mike
__________________
Regards mike 1983 911 SC sport, 1982 mini city |
||
|
08-15-2007, 02:37 AM
|
|
Ugly Betty
