|
|
|
|
| Author |
|
|
Registered
Join Date: Sep 2002
Location: Oakland, CA
Posts: 926
|
early 911 ignition lock problem ...
i read every article on this planet about how to rekey your 911 ignition key, but i'm stuck ...
i can't figure out how to remove the inner cylinder with the tumblers ... i drilled out the pin and removed the lock from the assembly, but i don't see how the lock itself would open to give me access to the tumblers?  here's what i got, the assembly is used and supposed to be from a '74 car:     HELP!  Andy
__________________
>> 1970, 914-6, 3.6L (Conversion) >> 1970, 914-6, #374 (Original) >> 1975/73, 914 Limo (Custom) |
||
03-29-2008, 04:39 PM
|
|
|
Registered
Join Date: Sep 2002
Location: Oakland, CA
Posts: 926
|
nevermind, the search finally worked ... i knew someone had to have had the same problem before ...
 Ignition switch - inside to fix START lockout
__________________
>> 1970, 914-6, 3.6L (Conversion) >> 1970, 914-6, #374 (Original) >> 1975/73, 914 Limo (Custom) |
||
|
03-29-2008, 05:35 PM
|
|
