|
|
|
|
| Author |
|
|
Registered
|
Alternator Wire Connection 88 - 930
All,
I am attaching a picture to illustrate my alternator connection dilemma. There are four electrical harness wires to attach to the alternator, and three connectors (10MM - Red wire; 8mm - Black wire; 7mm - Blue wire; The two brown wires spliced into one are/is the problem. I had them all marked but when I sent the alternator to be rebuilt, they removed my markings in the cleaning process, I presume. (If anyone needs the info on this rebuild facility in PA let me know - Total cost $89 plus one way Shipping to their shop - normally there is a refundable core charge, however, they didn't have my alternator in stock so I sent them mine - had it back in less than one week) Question: Do the two brown wire into one lead go on the 8mm or 7mm connector? When I took them off I thought they went together on the 7mm connector (blue wire), but obviously I am not sure. Can anyone with the elctrical diagram please assist ? This is keeping me fron enjoying driving my Porsche now that the weather is beginning to warm up on the Front Range, and it's killing me. Thanks in advance! Regards, Vincent 88 Porsche 930 Colorado Springs, CO 
|
||
05-16-2008, 07:59 AM
|
|
|
Registered
Join Date: Aug 2002
Location: Galivants Ferry, SC
Posts: 10,550
|
My very old tech article.....
see step 9..... http://www.pelicanparts.com/techarticles/911_volt_reg_replace/911_volt_reg_replace.htm
__________________
Wil Ferch 85 Carrera ( gone, but not forgotten ) |
||
|
05-17-2008, 10:52 AM
|
|
