ook.. How much preload on the torsion bars for my 912

[chatas17]

I put new tires on (lower profile) and it further compounds the ride height of my car being too high. Am I in for a surprise when loosen the brackets? The tires do look great... Thanks

[fbarrett]

Chatas:

Loosen what brackets? The front is easy (up to a point), but the rear requires removing the trailing arms and adjusting them to the correct angle. Without a photo, it's hard to judge the height of your car. I suggest reading Upfixin' der Porsche, Vol. 1, a PCA publication that describes the process of lowering a 911/912, which is easy once you have the information. I did mine 30-plus years ago.

Frank
1965 912, 451326

[chatas17]

Thanks Frank.. I will check out the publication. I have read a ton on the forum. I just need to dive in and get it going.