Can someone tell me which car this wheel is for?

[JonT]

This is a Cup I wheel I bought to display and not use on a car. Thanks.

[jackb911]

Cup I's were used on 964's.

A photo of the wheel would help since that isn't a Porsche p/n on the box.

[JonT]

It was a wheel Tire Rack sold so I was hoping that someone would know by the offset and bolt spacing.

It could be for a 964 or SC--I don't know and am trying to sell it and buyers are inquiring.

[Bill Verburg]

There are no 9" oem wheels which have ET47

964 & 993 9x17s have ET55, 9x16 have ET52.3

[OSI930]

The label on the box shows an ET of 47. The 9 X 17 for Carrera or SC fitment I believe is 15.

[Bill Verburg]

Originally Posted by OSI930

The label on the box shows an ET of 47. The 9 X 17 for Carrera or SC fitment I believe is 15.

There is no 9x17 SC or Carrera <'90
There is a 9x16 which is ET15

[OSI930]

Originally Posted by Bill Verburg

There is no 9x17 SC or Carrera <'90
There is a 9x16 which is ET15

Hello Bill. I was refering to the aftermarket Cup I 9 X 17 that I have seen available for SC and Carrera fitment. I think that 9 X 17 has an ET 15. Is that correct?

[rgra911]

I bought a set from the tire rack several years ago for this 964 conversion I did. Sorry I don't have the wheel offsets because I sold the car but they were 9x17's. I ordered them with a wheel fitment for 1980 911 SC. Hope this helps.

[450knotOffice]

Originally Posted by OSI930

Hello Bill. I was refering to the aftermarket Cup I 9 X 17 that I have seen available for SC and Carrera fitment. I think that 9 X 17 has an ET 15. Is that correct?

I believe that would be 15mm rear and 23mm front offsets for the replica wheels made to fit the '78 to '88 911's.