![]() |
|
|
|
Registered
Join Date: Jan 2007
Posts: 472
|
Trunk lid will not open...HELP!!
I was replacing the rubber stops on my rear trunk lid and closed the trunk for a second, now the trunk went down too low and is stuck and wont open, i tried pulling the cable while my brother pushed up the trunk lid up but nothing....ne ideas????
|
||
![]() |
|
Registered
Join Date: Nov 1999
Location: Centerville, Ohio
Posts: 3,120
|
Have your brother push down to relieve the stress on the latch while you pull the cable. If this doesnt work, pull the cable and push down on each front corner independantly.
__________________
Check out my blog for Parts & Cars For Sale - http://renn-spot.blogspot.com/ 1970 911S, 10 sec 67 Beetle (300 rear wheel HP) RGruppe#252 |
||
![]() |
|
Designer King
Join Date: Mar 2004
Location: Toronto, ON Canada
Posts: 5,499
|
Search my name and and lid you will find a thread on how I got mine open.
Sorry, I don't know how to post a thread.
__________________
Paul Yellow 77 Sunroof Coupe/cork interior; 3.2L SS '80 engine/10.3:1/No O2; Carrera Tensioners; 11 Blade Fan; Turbo tie rods; Bilstein B6; 28 tube Cooler; SSI, Dansk; MSD/Blaster; 16x7" Fuchs/205/50 Firestone Firehawk Indy 500s; PCA/UCR, MID9 Never leave well enough alone |
||
![]() |
|
Registered
Join Date: Oct 1999
Posts: 8,673
|
You mean the engine lid not the trunk lid?
Pull the cable out as far as it will go, put a vise grip on the cable to hold it all the way out (put a towel around it so you don't scratch the paint). Push down/ pull up on the edges. If that doesn't work, get a thin metal bar (used a steel ruler) slide it in and try to move the male spring piece back and forth. |
||
![]() |
|