Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Mar 2007
Location: Boyertown, Pa
Posts: 251
78 911 SC trailing arm bushings issue

I am putting this car back together and I have a problem with the Neatrix rear spring plate bushings. The outer fits into the cover plate and over the T-bar cover fine. The inner does not fit in the corresponding bushing well in the car. The well on the car is conical and the bushings are cylindrical. I test installed a set of conical rubber OEM bushings PN 644-333-131-00 but they are too small in dia resulting in play and what is worse, the spring plate bolt heads will rub against the body. I really d/n know what to do here.

Thanks in advance for your help
Rob Caso

__________________
Failure is not an option

78 SC, 06 Cayman S, 74 Targa, 1971 BMW R75, 1975 BMW R90S, 1983 BMW R100S, 2004 BMW R1200GS, 1974 Ducati 750 GT, 1974 Ducati 750 Sport, 1986 Ducati MHR Mille, 1995 Ducati 916, 1994 Bimota DB2, 2001 Tri 955 RS, 1970 Norton 750, 1975 Hon 400 F, 1971 Hon 750, 1967 Duc 250, 2016 Tri Thruxton
Old 09-24-2008, 10:31 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply


 

Tags
sc trailing arm bushings


All times are GMT -8. The time now is 12:49 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.