Need Wheel Info or Photos

[Supergas]

I have a 76S that I put 930 flairs on. I have been looking at the Euromeister Fuch replicas. My question is can the 8" be used on the front (et10.6) .I am sure a spacer will also be required. I know the 944 wheel has a different et. but I would like to fill the wheel well up more than the 7" wheel. Any photos would help if you used the 8". or any suggestions. Thanks Dave

[Bill Verburg]

Originally Posted by Supergas

I have a 76S that I put 930 flairs on. I have been looking at the Euromeister Fuch replicas. My question is can the 8" be used on the front (et10.6) .I am sure a spacer will also be required. I know the 944 wheel has a different et. but I would like to fill the wheel well up more than the 7" wheel. Any photos would help if you used the 8". or any suggestions. Thanks Dave

Yes, you can use it and yes you will have to mess w/ spacers.

Contact Jeff Alton, he has some very nice Fuchs look wheels designed for your application.

[Supergas]

Anyone with Photos???

[porschenut]

Standard wheels on the 3.3 Turbo through '89 were 7/9 x 16. I'm not sure what (or if) spacers were used, but I would use spacers to fill out the wells, rather than spending big $$ for bigger wheels.

[JMatta]

I would say go with the largest wheel that will fit. Spacers make the wheels look fine from the side, but always look funny from the ends where they look too narrow for the wheel wells.