This one is "correct" higher than you think ;)

http://forums.pelicanparts.com/uploa...1231265199.jpg


Heck mine is to low, but I'm not the one that installed them, and it's not a big enough deal to me to redo it.

http://forums.pelicanparts.com/uploa...1231265261.jpg

Ferg

Ferg, love that color combo/ Please post more pics somewhere or tell me where they already are located...:cool:

Yeah....looks washed out.

I have the factory dimensions from the 1973 Carrera RS if anyone is interested. At least you will know how they were installed originally.

can you post them?

The top of the solid block portion of the sticker, should line up with the gap between the rear bumper and the rear quarter panel.

This is not a exact measurement, but something that I noticed looking at low mile original paint cars online, and seeing a few in person as well.

If it were me, I'd look around for a original paint car for sale and email asking for a favor.

FergSmileWavy

http://forums.pelicanparts.com/uploa...1231429704.jpg
Hope this is good reference.

Cool.:)

We eye balled it and came out close to diagram.http://forums.pelicanparts.com/uploa...1231445072.jpg
http://forums.pelicanparts.com/uploa...1231445108.jpg

http://forums.pelicanparts.com/uploa...1231446037.jpg

Here is mine,install is a easy job.

DIY http://www.porscheforum.nl/viewtopic.php?p=229578#229578 DIY
.

Cliff you got specs on your car anywhere? those rear wheels look great.

This is what the factory spec says that goes along with these photos:

DOORS
1. Mark front and rear location of lettering [50mm] above the door lower edge.
2. left door: Align the letter "C" 10mm behind the forward edge of the door.
right door: Align the point of the "a" at the forward door edge.

ENGINE COMPARTMENT

1.PORSCHE LETTERING Mark the location of the lettering 25mm from the bottom edge of the lid on both sides and 36mm from the bottom of the lid in the center.
2. CARRERA RS on lid spoiler. Mark location of the beginning of the lettering 160mm below the spoiler inner edge, and 95mm to the right of the lid center.

COLORED LETTERING

Carrera vehicles painted Grand Prix white are furnished with lettering in colors matching the respective wheel color (red-blue-green).
All other vehicles are furninwhen with black lettering.

REMOVING DAMAGED LETTERING

Heat the lettering with air heaters, infra-red lamps etc. to the opint where it can be peeled off without pulling the paint off in the process. Wash remaints (sic) of adhesive off the paint surface with a cleaning solvent. [ have used naptha]

Black on Black
 

http://forums.pelicanparts.com/uploa...1064789427.jpg

http://forums.pelicanparts.com/uploa...1064789456.jpg

I think it is a great idea but... not as cool as expected. Found these in a really old thread.

-John

Hmmmmm, classic example of a wash out.....kudos to the photographer.....