|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2007
Location: W.Sacramento
Posts: 305
|
engine to transmission torque settings
got the transmission mated up with the engine! just trying to find out what the torque value is for the engine-to-transmission studs that run through the bell housing and the starter. searching the forum didn't show anything.
just to clarify, i'm not asking about the 4 donut mounts, i saw an earlier post from Warren Hall that confirmed those engine and transmission mounts as 58 ft/lbs thanks!!!! |
||
02-22-2009, 02:50 PM
|
|
|
Nice marmot.
Join Date: Jul 2007
Location: Daytona Beach, FL
Posts: 118
|
SC Bentley manual says 45 Nm (33 ft-lb).
|
||
|
02-22-2009, 06:10 PM
|
|
