Originality question please.. 69t

[calling911]

Before I clean these up and install could someone tell me if they are correct? Dont know what you call these aluminum things but I'll call them kick panels..

[victorviking]

Not 100% sure on the originality, but my '69 911e's got 'em (behind the dog) and this car is pretty original

[Grady Clay]

JP,

I assume you are talking about the aluminum threshold.

There are specific plastic ‘rivets’ that hold the threshold to the chassis. These parts are still available, even from PCNA.

Best,
Grady

[calling911]

Originally Posted by Grady Clay

JP,

I assume you are talking about the aluminum threshold.

There are specific plastic ‘rivets’ that hold the threshold to the chassis. These parts are still available, even from PCNA.

Best,
Grady

Thanks. I was gonna use screws.. I'll see if our host has them.

[Tom C.]

I've got mine in the past from Stoddard's (*************). Don't have the part number handy, but if you have trouble finding them let me know and I'll post the number. Be sure to buy a few extra 'cause you may break/lose a few during the install.

[calling911]

Originally Posted by Tom C.

I've got mine in the past from Stoddard's (*************). Don't have the part number handy, but if you have trouble finding them let me know and I'll post the number. Be sure to buy a few extra 'cause you may break/lose a few during the install.

Thanks. Will do.. Ill let you know if I cant find them.
Hmm found the "step plates" here;
http://www.*************/shop/shopdisplayproducts.asp?id=238&cat=Dash+Pads%2C+Strap+Clamps+%26+Step+Plates

But no "rivets".