convert dash clock to desk clock?

[Jonesy78]

Originally Posted by prebordao

Sorry, I got it wrong. The hour hand is in the revcounter.
Time is 9.59 or so... about to turn 10

If you get that from looking at that picture, I'll have whatever it is you're having.

[80-911SC]

proof positive of the Power of the average Pelican

wayne you should(and i am sure are) be proud of the stuff some of these birds do

[Hugh R]

Originally Posted by Jonesy78

If you get that from looking at that picture, I'll have whatever it is you're having.

Whew, I thought it was just me. And I haven't had anything to drink, yet.

[bart1]

Yes.

This was one I built, inspired by Andreas (the guy on Rennlist).

[pete917]

Originally Posted by bart1

Yes.

This was one I built, inspired by Andreas (the guy on Rennlist).

That is awesome. I love the way it takes pride position in the room

If you had to buy the parts new to make that clock it would be the most expensive one in the world !

[HunterVonWurst]

That's not the correct year for that clock/fan combo...

[bart1]

Originally Posted by HunterVonWurst

That's not the correct year for that clock/fan combo...

Correcto! It's a hot rodded 911 table clock. SC clock, 993 fan, 993 vinyl behind the fan holes, modern silver whel paint.

Note the time.

[pete917]

I hadnt noticed the time. Good call.

[HunterVonWurst]

Originally Posted by bart1

Correcto! It's a hot rodded 911 table clock. SC clock, 993 fan, 993 vinyl behind the fan holes, modern silver wheel paint.

Oh...I was just trying to be funny. I have no idea if that's the correct combo or not.

[bkreigsr]

Originally Posted by scotricker

that's what mine looks like, too!

I thought it would be silent,,, but it's not. It ticks like a wall clock. Maybe the gears are worn out? I don't know.

I was going to finish the wood , with stain, etc. but haven't gotten around to that yet.

doesn't matter - you've made up for the noise factor by getting extra credit for having the working light
Bill K

[scotricker]

Yay! I love extra credit !