Need info on Tap size

[Supergas]

Anyone know what the tap size is for the air injector nozzle on the heads for the air pump lines. Or what size plug is it? Thanks

[Supergas]

I forgot,it's a 76 2.7

[boyt911sc]

Originally Posted by Supergas

Anyone know what the tap size is for the air injector nozzle on the heads for the air pump lines. Or what size plug is it? Thanks

Supergas,

The air injector tap size for SC's is M14 x 1.5. I believe it would be the same for the 2.7 liter engine. HTH.

Tony

[cgarr]

Originally Posted by Supergas

I forgot,it's a 76 2.7

10X1.00 will plug the hole. I see you need to tap them, I would get a thread chaser, a tap may leave the hole a bit loose.

[Supergas]

All the treads are good,I was trying to figure out how to describe what I size I needed to plug.I saw 1 article someplace it was a torque converter drain plug bolt for a Mercedes. Hope someone can help me ID. Thanks Guys

[Jesset100]

[Supergas]

Thanks for the info.

[Flat6pac]

I ll go with the 10mmx1mm which is fine thread.
Bruce