71 911T Sporto Reassembly Project Intro....

[Hages]

After doing a bare metal respray 4 years ago on a mechanically sound '71 911T sunroof sporto and having it linger unloved in the garage, I have to get it out of the garage and enjoy it!

I have a ton of questions as I replace the gaskets and fit all the body components together.

The little questions I'll ask on this thread but other more general, I'll post a separate thread.

Thanks for your support and assistance!

Basically it needed minor bodywork, paint!, and minor interior refresh. I intended to replace what was cosmetically appropriate and not to over-restore and keep as much of the factory materials in place.

This was a one family owned vehicle and delivered to the SF Bay Area.

On to the before pics:

[Hages]

Only three areas of rust: headlight buckets and passenger side upper bulkhead.
Besides a couple of parking lot ding repairs, the metal shows original factory metal coating under the primer.


Disassembly/Paint Photos:

[Hages]

Paint and Current Status:

[Flieger]

Beautiful work.

[Hages]

Thanks Flieger.

Looks like you have an impressive build!