need help wiring ignition switch

[cmcfaul]

Replacing my ignition switch and desperitly need help figuring out which wires go were.

There is a harness that unplugs from the firewall with a yellow and 4 red wires.
There are 3 wires (grey, red & yellow) that are part of the main wiring harness (don't unplug from anyting except the ignition switch)

There are 10 terminals on the ignition switch and only 8 wires that attach to it.

the order went like this
.................red
......yellow......red
......red................red
....yellow grey.....red



Any help is GREATLY appreciated.

Chris
73 911 E

[86 911 Targa]

Originally Posted by cmcfaul

Replacing my ignition switch and desperitly need help figuring out which wires go were.

There is a harness that unplugs from the firewall with a yellow and 4 red wires.
There are 3 wires (grey, red & yellow) that are part of the main wiring harness (don't unplug from anyting except the ignition switch)

There are 10 terminals on the ignition switch and only 8 wires that attach to it.

the order went like this
.................red
......yellow......red
......red................red
....yellow grey.....red



Any help is GREATLY appreciated.

Chris
73 911 E

Try this.

Good luck,

Gerry

[brads911sc]

Here is a good pic...

Problem with ignition switch wires