![]() |
|
|
|
Registered
|
Oil Tank/Inner Fender support tube rubber mount part number?
This is for an 84 Carrera and I cannot find the part number on PET or in any diagram.
This is a rubber piece that isolates the oil tank to the inner fender support bracket in the rear. If you are looking inside the fender it is clearly visible to the left. There are two bolts on the support, one to the tank and one to the inner fender. The rubber piece has basically disintegrated. My guess is it helps to isolate vibrations. Anyone have a pic or part number? Thanks -
__________________
Jeff |
||
![]() |
|
Registered
|
Crickets.....
__________________
Jeff |
||
![]() |
|
Registered
Join Date: Nov 2000
Location: Dallas
Posts: 3,575
|
Possible that it's not sold separately?
|
||
![]() |
|
coolcavaracing.com
|
Are you referring to the rubber washers that sit round the mounting bolts on the oil tank like the brown thing in this picture stuck to my cracked oil tank?
![]() If you are, then I just ordered all new stuff to mount my new tank. here are the part numbers you need for everything. .- 901 107 661 00 .- 901 107 639 01 .- 901 107 692 00 These numbers do not bring up much here on Pelican, so best to verify with the PET or Pelican via phone before you order ![]()
__________________
Pål (Paul) - The Norwegian lost in Finland... 1978 911SC 3.6 | 2001 Boxster S Racing Car | 1966 912 based 911 RSR replica racing car (for sale!) come and follow the Porsche Sports Cup racing fun and me at www.facebook.com/coolcavaracing ![]() |
||
![]() |
|
Registered
|
I guess that is possible - I can't even really find a diagram of the bracket. I guess I can make something that will work out of scrap rubber - I was just ordering a few cheap odds and ends and it seemed like a cheap thing to pick up - "if" available.
__________________
Jeff |
||
![]() |
|
Registered
|
Kroggers - thanks for the response.
Not sure if we are talking about the same thing. I marked in red the area I am talking about - there is a fender support that mounts there and a rubber piece sandwiched in the middle. Is one of the below part numbers that piece? ![]()
__________________
Jeff |
||
![]() |
|
![]() |
coolcavaracing.com
|
No, sorry. The part numbers I have are for the rubber on the bolts - the reddish/brown thing in this picture, and related parts.
![]() This could be what you are looking for, or it could be the mount itself - 901 501 930 22
__________________
Pål (Paul) - The Norwegian lost in Finland... 1978 911SC 3.6 | 2001 Boxster S Racing Car | 1966 912 based 911 RSR replica racing car (for sale!) come and follow the Porsche Sports Cup racing fun and me at www.facebook.com/coolcavaracing ![]() |
||
![]() |
|