|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2009
Location: Ottawa, Ontario
Posts: 289
|
Adding a turbo tail
Hi guys,
did a search but didn't really find what I was looking for. I have an 86 3.2 with the carerra tail and I was thinking I would go to to the 3.3 turbo tail as I really like the look. Do I need to buy a new engine lid, or can I remove my tail from my lid and add the new tail? What is involved mountng wise? Also, where do I find the seal that goes between the tail and the engine lid, I haven't been able to locate that seal with our host. Thanks guys. |
||
10-04-2010, 03:32 AM
|
|
|
Registered
Join Date: Jul 2006
Location: Honolulu, HI
Posts: 9,835
|
You can use your old engine lid, but you will find the turbo base mounts much lower on your decklid. You will have a large expanse of decklid that is visible through the slats so you may want to paint the inner part of the decklid black.
__________________
'24 Tesla Model 3, '22 Tesla Model Y '19 Tacoma '06 Carrera, '79 930 '06 S4 Avant |
||
|
10-04-2010, 04:05 AM
|
|
