Radio delete suggestions needed

[DRV2FST]

I have decided to remove the radio, speakers, and amp from the car. What can I do about this hole in my dash? I know there are cover plates somewhere. Is there any storage bin that will fit here?

[ttweed]

Originally posted by DRV2FST
What can I do about this hole in my dash? I know there are cover plates somewhere.

Radio delete plates are available for $5 from our host.
My solution involved adding an IROC sticker for grins and giggles.





TT

[Don Plumley]

I made a small plate from scrap aluminum, then glued vinyl (like from the headliner/interior trim) on. It's held in very well with friction.

[Sapporo Guy]

If I'm not mistaken you can probably fit a 1 din bin into the hole. However, I'm not sure about the mounting for it. If the radio used the rear screw some 1 din bin units have a similar setup. should do the trick.

[9elf]

Radio delete plate from the host as already suggested. Then you have somewhere unobtrusive for your shift light.

[don911]

[DRV2FST]

Sapporo, where does one get a 1 din bin?

[spuggy]

Originally posted by DRV2FST
where does one get a 1 din bin?

Post 85.5 944's have a factory one under the radio, I got a generic one from a car audio place when I replaced the factory 2 din audio in the wife's car with a 1 din Blaupunkt.

[Hatari]

Here's mine...
Jack

[Wavey]

Nice Kremer badge, dude!

[john walker's workshop]

find a glovebox door facia and carefully trim it down to fit flush in the radio hole. same texture, so it looks factory.

[ppanagis@gmail.]

I put the radio in the glove box and changed the entire faceplate using a ribbed aluminum...It was not as hard as you would think.