Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   First post, introduction and a couple questions... (http://forums.pelicanparts.com/porsche-911-technical-forum/656847-first-post-introduction-couple-questions.html)

kazlx 02-09-2012 06:45 AM

First post, introduction and a couple questions...
 
Hi, my name is Joe. I live in SoCal and I'm looking at buying a 1970 911T. The car has been updated to a short hood with what looks like turbo flares. I have been reading quite a few threads trying to find out what would have been required to do this conversion and what would be needed to go back to a long hood. It seems the threads I have read involving updating long hood cars are just met with "Noooo, don't do it."

Since I would possibly be buying a car that has already had it done, I am wondering what would have been the correct way to do this, so I can check to see that it has been done correctly and what would be involved in putting it back. It seems the car would be more valuable as the original long hood.

I have been into fox body Mustangs since I was a teenager, but fell out of it a few years ago. I have always loved Porsches and figured now is as good a time as any to jump in. I was looking at 996TT models, but I just happened to come across this 1970 T and it struck me for some reason. I am mainly looking for something that I enjoy driving again, along with getting to tinker.

A couple other projects from the past:

A stock rebuild for a daily driver 89 Mustang:
http://img.photobucket.com/albums/v4...ecarmotor1.jpg
The car:
http://img.photobucket.com/albums/v4.../orangecar.jpg

Another motor, a 331 stroker:
http://img.photobucket.com/albums/v4...tor0001_r1.jpg
That went in here:
http://img.photobucket.com/albums/v4...ainted0001.jpg

And a car I saw at a shop that I loved:
http://img.photobucket.com/albums/v4...x/27d38113.jpg

And the other main hobby:
http://img.photobucket.com/albums/v4...x/IMG_0348.jpg

porwolf 02-09-2012 07:12 AM

Welcome to the madness! I am sure to convert the 1970T back to long hood splendor should not be very difficult. That green RS would be a good goal to work toward. One thing about the long hoods though, beware of the rust situation. Don't get more than you bargain for. Unless you are a restoration fanatic and welding artist with unlimited time and patience. I am also somewhat suspicious of the fact that the car your are interested in is a short hood conversion. That conversion is usually done by people less concerned with body rust if it does not show at the surface. They are into outside looks mostly, I am afraid. There could be hidden surprises.

kazlx 02-09-2012 07:20 AM

It looks like the car was converted a while ago. From what I have read, it seemed it was a popular thing to do in the 80s and 90s when the cars weren't really 'vintage' at that point. I have a friend that has quite a bit of experience with older P cars that will help me check to see where the rust issues might be and if there is anything I have over looked. I know that with any cars that are 40+ years old there will be issues, but rust is definitely a concern. It seems there are plenty of replacement parts available for most things, but I'm definitely not planning that degree of restoration at this point. I would hate to dig into a car and find it held together by bondo and paint. I'm thinking that knowing how well the hood conversion was done would give me some hints about the car.

Edit: I originally saw the car for sale on CL, but notice it was also listed here. I could always post the ad link, but I'm not sure what the etiquette is quite yet.

Bob Kontak 02-09-2012 07:23 AM

Welcome.

Need some pics, asking price, and general condition of the car. I am thinking no go unless steeply discounted.

Also, you have exceeded your annual limit of Mustang pics in one post. :-)

Edit: It was one thing when an old T could be bought for $6-9 k. Now it is real strange with the increase in value. Maybe the few thousand dollars of parts and paint (DIY) would be well worth it?

Rust as porwolf says is real important to avoid.

kazlx 02-09-2012 07:27 AM

Here is the link to the ad on here:

http://forums.pelicanparts.com/porsche-cars-sale/651092-fs-matching-1970-911t-wide-body-14-500-obo.html

The car is local to me, which is probably the only reason I looked at it. I personally looked at it already, but will be giving it a final once over this weekend with a friend....although it would be nice to get some other feedback.

Bob Kontak 02-09-2012 09:45 AM

The car looks pretty nice.

My thoughts are that buying it puts you in an unfavorable position.

You live with it and have a Turbo look car that has 123 hp (my kids 2000 Corolla has 125) and then you have trouble selling it because of it being modified.

You put it back to where it was by paying through the nose (big, eye-opening money to pass scrutiny of a Porschephile) or work like a dog for several years doing it yourself.

That said, I do not know the market for the long nose cars in original condition. Even if you could make a few thousand dollars would the work, spend and stress be worth it?

kazlx 02-09-2012 09:55 AM

Yes, I would definitely not use the term 'fast' to even remotely describe it. Having come from V8s and also seriously considering a 996TT, it's nowhere near those leagues, but there was something intangible that made it enjoyable to drive. If I did alter it back to stock, I would definitely do 90%+ of the work myself, which I actually enjoy. It seems like a nice car, but the price also seems high because it has been somewhat bastardized by purist terms. It seems if it was more 'stock' at that price it would be gone already.

I'm not looking to buy the car to make money....I just don't want to get stuck with something very undesirable. If I do go the route of making it more original, it would be done correctly.

Bob Kontak 02-09-2012 11:25 AM

There is a marketplace discussion board that can give you an idea of value.

Porsche Marketplace Discussion - Pelican Parts Technical BBS

You have your head on straight. If it does not feel right...........

mcaterino 02-09-2012 11:32 AM

I'm a '70 T owner, and would generally love to see that car returned to its original appearance. But if you really want a longhood, that would be a difficult and expensive place to start from. Even doing the work yourself, you're probably looking at close to $2500 just in the body panels alone (hood, both front fenders, both rear quarters, front and rear bumpers), and a long list of minor (but expensive) parts to recreate the light boxes, bumper trim, etc..

The one variable not addressed in the ad is the engine's condition. Mileage? Ever rebuilt? You say it runs well, which is good, but if it's really never been 'molested', it will probably need it sooner than later. That's another several thousand at a minimum.

Its condition, above and below does look quite good, rustwise and fit and finish-wise, and my feeling is that that car should probably stay the way it is.

The price listed is probably reasonable, for some market segments. I expect there are a lot of nonpurists out there who would love the look and consider that a pretty good deal. You should be able to find a better restoration candidate though for $5-6000 less than that, which would need far less in terms of replacement parts.

That's my $0.02, anyway.

Mike

euro911sc 02-09-2012 11:59 AM

Thats a pretty clean looking car. Maybe just throw a 3.2 in it and you'll have a nice driving short hood wide body.

-m

kazlx 02-09-2012 12:07 PM

Quote:

Originally Posted by euro911sc (Post 6547813)
Thats a pretty clean looking car. Maybe just throw a 3.2 in it and you'll have a nice driving short hood wide body.

-m

To start with, before I did anything else, that is probably what I would do and just drive it for a while. Motor swaps in these cars don't seem to terribly difficult. I love hp and 130 won't cut it for me in the long run. Although I would store the original motor to keep with the car because it would be a shame to separate them.

Ronnie's.930 02-09-2012 12:41 PM

You might as well skip the 3.2 and put a 930 powerplant in there - then you will have the sack to back-up the looks! Of course, then you will want the 930 brakes etc., etc , etc.,

Bob Kontak 02-09-2012 01:00 PM

Quote:

Originally Posted by Ronnie's.930 (Post 6547904)
You might as well skip the 3.2 and put a 930 powerplant in there - then you will have the sack to back-up the looks! Of course, then you will want the 930 brakes etc., etc , etc.,

The 70 is 500 pounds lighter than the 2,800 pound 911 SC. A 3.2 would make it scoot like s*it flying off of a shovel.

wayner 02-09-2012 01:02 PM

Keep in mind that a 911 engine build can cost more than an entire mustang!;)

kazlx 02-09-2012 01:13 PM

Quote:

Originally Posted by wayner (Post 6547942)
Keep in mind that a 911 engine build can cost more than an entire mustang!;)

I'm better off financially now than I was 10 years ago. That polished stroker motor had at least 10k into it and was built to run 600+ rwhp. That was my main reason for getting away from cars at the time...the car was turning into a snowball from hell and I couldn't keep up.

I like the idea of a 3.2 swap or something similar, running it for a while and cleaning it up.

Ronnie's.930 02-09-2012 02:01 PM

Quote:

Originally Posted by Bob Kontak (Post 6547941)
The 70 is 500 pounds lighter than the 2,800 pound 911 SC. A 3.2 would make it scoot like s*it flying off of a shovel.

Ya', I was just doing a little chain yanking - the 930 engine would be overkill for that chassis and the cost (given a donor engine would need to be built) would exceed the cost of the whole car by a longshot - still, would be an asswhipper, though (as would the 3.2) . . .

porwolf 02-09-2012 02:01 PM

Having had rust issues with all my Porsches before my 79 SC I looked at the pictures of the car posted in the For Sale section. I am not sure what to say about the area under the rocker panels. A good poking with a small sharp screw driver into the area behind the outside rocker panel may give you clues. Maybe you could pull back the carpeting on the inside bottom of the doors to see also. Then there are the sensitive areas on the bottom of both the front and rear glass screens. But it is difficult to get there without major interior upholstery removal. I would look very carefully on the outside to see any paint irregularities, however small. The rear torsion bar area looks OK to me, but I am not an expert. Also the inside of the front door cowlings where you see the very rear end of the front fender could be a problem area. The hood under the emblem looks like peeling bondo, but should be an easily fixable problem.

Overall I am still concerned about what the PO tried to do with the car. He kept the original engine unmodified but invested rather heavily in superficial outside appearance. What's with that? The engine just does not match the image. And fiberglass fenders are a cheap way to change the wheel wells. But maybe underneath are the original steel fenders? I think the car could use some substantial work if you intend to make it a real classic performance car like one out of Magnus Walker's stable.

kazlx 02-09-2012 02:12 PM

We will definitely be doing some poking around. I know these cars have rust issues and I would hate to get stuck with one that is hanging together from paint and bondo.

porwolf 02-09-2012 02:14 PM

And, you might consider spending the $14,500 asking price on a decent SC (78-85) or even Carrera (86 plus) and with minor body changes focus on the engine. That area has much more accessible parts available. And then there is the 930 turbo area before 1978 to consider. After all, Porsche started galvanizing the bodies in 1975. Much less rust since then, especially if the car spent it's life in a southeren region.

kazlx 02-09-2012 02:23 PM

My buddy, who is heavily into the older cars, is making the same suggestion that I buy an SC.


All times are GMT -8. The time now is 08:54 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.