|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2002
Posts: 12
|
Need help ordering the right Air Sensor Boot hose line
For my '82 911SC - the hose line running from the back of the air sensor boot was broken.
Here is the photo of the hose connected to the air sensor boot:  The replacement part diagram (911-110-276-02, tagged as #43) in the Pelican and Parts Tech Manual  has two "branches" -  , while my hose has three.  What is the right part number I should use, and does Pelican have it? I went through the entire Pelican catalog and can't seem to find the same one. Was there something unique about 1982? 
|
||
02-12-2012, 07:26 PM
|
|
|
Registered
|
As of now I have the same problem as the original poster.
|
||
|
04-29-2013, 03:45 AM
|
|
|
Registered
|
CIS components.......
PM sent.
Tony |
||
|
04-29-2013, 04:37 AM
|
|
|
Banned
Join Date: Apr 2004
Location: Portugal
Posts: 1,513
|
Wow, it's quite busy on the back. The 74' is a lot simpler.
|
||
|
04-29-2013, 05:06 AM
|
|
|
Registered
Join Date: Apr 2002
Posts: 12
|
Found the air sensor hose in Germany
It was very hard to find, as no one (even used) had a good part. I had to order directly from Germany at Freisinger Motorsport. The shipping cost more than the ~$92 part, and I had to pay in Euros. Web page is FREISINGER MOTORSPORT - Porsche: Historic racing cars, Restoration, Tuning, Cars & parts. I'll have to check to see what was the correct part number. Send me a private message with your email and I'll look up the info later today or tomorrow.
|
||
|
04-29-2013, 08:04 AM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
