76 3.0 turbo flywheel

[EDL0944]

I am searching for a flywheel for my engine. I have a 77 euro motor and I need a PN 930.102.201.01. A fellow has offered me a flywheel pn 930.102.201.3R
Is that a compatible flywheel and will a 915 ring gear fit on iti have a Lim Slip
915 trans that I’m going to use on the motor.
Eric. 843-298-9677 or ericlunde44@gmail.com

[stevie 77 930]

If you are using a 915 gearbox, you will want a 911 6 bolt flywheel and 915 clutch assembly to match up.

[spuggy]

Originally Posted by stevie 77 930

If you are using a 915 gearbox, you will want a 911 6 bolt flywheel and 915 clutch assembly to match up.

+1 This: ^^^^^

[Flat6pac]

You’ll want everything 915, flywheel, ring gear, clutch package
Bruce

[Kraftday]

Here's what I would run..
911 RSR 915 Flywheel 225mm with ZF Sachs RE Clutch.
The other clutch option would be a KEP. The clutch to not to use would be the Sachs Power Clutch or the standard clutch. The original turbos with the 240mm flywheel clutch needs higher clampload and friction surface area. Also the best to avoid aluminum flywheels.

[lrodri64]

I have that 930 flywheel...
Send to me a pm with your email to send you some pictures.
Regards.