Pelican Parts Forums
Page 1 of 2 1 2 Next »
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   Exploded Engine Pic... (http://forums.pelicanparts.com/porsche-911-technical-forum/70730-exploded-engine-pic.html)

Wayne 962 06-06-2002 07:34 PM
Exploded Engine Pic...
 
http://forums.pelicanparts.com/uploads/engine2.jpg

Ha, made you look!

-Wayne

Jim Sims 06-06-2002 07:55 PM
Okay, let's play a game. What parts are missing from this image?
Cheers, Jim:D

scca_ita 06-06-2002 08:08 PM
wrist pins

boyo 06-06-2002 08:10 PM
Spark plugs!

Actually, I was expecting more carnage... :D

-Boyo

Doug Zielke 06-06-2002 08:11 PM
Quote:
Originally posted by Jim Sims
Okay, let's play a game. What parts are missing from this image?
A bucket full of fasteners.
(There ain't gonna be no rebuild without 'em!)

Superman 06-06-2002 08:16 PM
Bearings.

Victor 06-06-2002 08:19 PM
About 13L of Oil.

Jim Sims 06-06-2002 08:25 PM
Superman, Surely you remember that seal carrier between the chain case and cam tower! Case through bolts, nuts, washers and o-rings. There's plenty more besides fasteners. :D Jim

TedSlick 06-06-2002 08:27 PM
it all looks so...simple [gulp]

http://www.pelicanparts.com/support/smileys/loki5.gif

nostatic 06-06-2002 08:28 PM
A case of Becks and a pair of vice grips.

BlueSkyJaunte 06-06-2002 08:36 PM
...don't forget the 20-lb. sledge for final adjustments.

emcon5 06-06-2002 08:39 PM
Distributor cap and sump plate?

Tom

Doug Zielke 06-06-2002 08:44 PM
Now this, kiddies, is a real "exploded motor".
You don't want to know what the insides look like.....

http://forums.pelicanparts.com/uploa...kcase_hole.jpg

Adam 06-06-2002 08:53 PM
I'll tell you what's missing!
 
Alloy 930-spec valve covers to replace those leaky Mg units... :(

Jim Sims 06-06-2002 08:55 PM
Doug, Send that puppy out to CE; they'll weld it up, line bore it, put in case savers the size of your big toe and it'll be good as the day it was squeezed into the mold. :D Jim

Wayne 962 06-06-2002 09:01 PM
Not so fast...
 
Those are Turbo valve covers - just painted black.

Wrist pins are inside the pistons...

-Wayne

Wayne 962 06-06-2002 09:03 PM
<big>THIS IS WHAT WILL HAPPEN IF YOU DON'T BUY MY NEW BOOK!!!</big>

http://forums.pelicanparts.com/uploads/engine3.jpg

Good scare tactics, huh?

-Wayne

CamB 06-06-2002 09:22 PM
I posted one on Wayne's other thread - its big, so I'm not going to up the bandwidth on this page too:

http://forums.pelicanparts.com/porsche-911-technical-forum/70736-looky-here-rare-911-s-rod.html

I reckon "my" (fortunately not!) pic is better, just not as dirty :D :D :D

Doug E 06-07-2002 02:36 AM
Wayne - out of curiosity, what causes the type of damage shown in the "scare tactic" picture above?

VenezianBlau 87 06-07-2002 03:53 AM
...Wayne and his minions scurry through the night and swipe your intake valves...


All times are GMT -8. The time now is 02:19 AM.
Page 1 of 2 1 2 Next »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.