|
|
|
|
| Author |
|
|
Registered
|
Help! Axle w/two CV Joints question?
Want to buy two new axles with CV Joint. My car is a 930 1977 fitted with the 915.73 transmission 108mm output flanges. Now I am looking for new axles with CV joints fitting the 915 transmission and my 930 car with the aluminum trailing arms and 930 hubs. is there anyone who can tell me what to buy and where?
Any help would be appreciated  mouri |
||
08-26-2013, 01:45 PM
|
|
|
Registered
|
Mouri... I'm not up to speed with the variations which might exist between a 930 and 915 trans. I'd suggest speaking with a Pelican tech rep --- they would surly know.
__________________
Karl ~~~ Current: '80 Silver Targa w /'85 3.2. 964 cams, SSI, Dansk 2 in 1 out muf, custom fuel feed with spin on filter Prior: '77 Copper 924. '73 Black 914. '74 White Carrera. '79 Silver, Black, Anthracite 930s. |
||
|
08-27-2013, 12:56 PM
|
|
|
Fleabit peanut monkey
|
Yikes. See post number 6 from T77911S. It has a picture and size chart of factory rear shaft sizes.
LINKS to helpful websites
__________________
1981 911SC Targa |
||
|
08-27-2013, 01:10 PM
|
|
Bandit :-)
Singer Porsche "Wannabe" project
1974 Carrera
1979 930
1980 SC Targa
1981 Porsche 911 SC Targa
