Pelican Parts Forums
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   It didn't fall 'IN' the motor after all... (http://forums.pelicanparts.com/porsche-911-technical-forum/778081-didnt-fall-motor-after-all.html)

bryant4 11-01-2013 10:28 AM
Diagnosis from Ollie's
 
Hello Bill
We have the heads all inspected. 3 of the exhaust valves are burnt and all the valve springs are bad 2 are already broken this is a common problem on early 3.0 heads. We do recommend a valve job, resurface, replace all guides and replace all exhaust studs. The labor cost is 849.00 parts 388.00 plus shipping. Let me know what you would like to do
Thanks Ike

Ike figures they will ship by next wed!

Seems like a good thing I dropped that bolt into the works.

KNS 11-01-2013 02:13 PM
Looks like you made the right decision - nice work.

snbush67 11-01-2013 04:15 PM
I would find out how much more it would cost to get them drilled for twin plugs while they're out, you know your gonna want to do it later.

bryant4 11-01-2013 05:04 PM
Just
 
checked Ollie's list

http://www.olliesmachine.com/uploads/Ollie_s_Price_List_0513.pdf

snbush67 11-01-2013 05:41 PM
Page # 6 $350.


All times are GMT -8. The time now is 06:31 PM.
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.