Mud/stone guards

[hhackma]

Is anyone on here using these on the rear of their cars? If so can you please post some pictures and tell us where you got them? Thanks.

[DRACO A5OG]

flaps or on chassis?



Host has the on chassis type

[Ronnie's.930]

[4flyboy]

Got some for my Turbo Body from our host but not sure I'm going to use them......I think I'd prefer clear. Anyone know where to source those or custom only?

I'll post some pictures when I figure out what to do. The rear quarters get pretty beat up, there's a reason for them. Scott

[86 ssinit]

If your looking for draco's type I just got them from magnagrafik.com. for around $50. They look good and if you don't like them just take them off. If your looking for Ronnie's type I have no clue.

[bhmkv]

I have them, but would prefer clear if anyone knows where to find quality ones. Our host sells the black ones.

[nineball]

i forget the pelican who was selling these but i bought one of the last sets a couple years ago. i'm sure if you searched hard enough you could find the thread.

[4flyboy]

Those are great Nineball,

Had to look at the picture twice to realize that they were there and what I was looking at. That would eliminate my need to protect the rear flares with anything if I had them behind the front wheels.... Thx Scott

[nineball]

my set were designed for the rear only based on their mounting setup. i suppose you could get some abs and cut it down to what you needed for the front.

[964TargaC2]

First off no aaffiliation with any provider mentioned

You can get the flaps Ronnie has shown at Truckstops of America

YOu can get thekind nineball has shown here

Mainely Custom by Design - Wheels and Suspension products

[X JBM X]

So, the other option you have is to go to IKEA and pick up some black plastic cutting boards for $5. I made a template and used a razor blade and cut these for a car I used to have. they worked like a charm, but don't try to go up any curbs - running them over can rip them off the car.