|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2002
Location: Rochester, MN
Posts: 55
|
Guage Wiring Pic
Does anybody have some good pics of the wiring going to their guages? I took some before I pulled all the guages but unfortunately they are to dark and I can't tell what goes where. Appreciate the help.
__________________
Bob Springer 1978 911 SC (Almost Finished) http://www.noh2o.com |
||
12-12-2002, 07:54 AM
|
|
|
Registered
|
Free Bump, Im curious on this too
__________________
Wheels Last row 1977 3.0 930 260hp built, still reassembling Row 1998 996 MK1 3.4 296hp new daily driver |
||
|
09-27-2014, 05:15 PM
|
|
|
Registered
Join Date: May 2011
Posts: 7,245
|
Here are my '79SC speedometer connections:
__________________
79 SC Targa 72 T Targa Sold 68 T Coupe Sold 65 912 Coupe Sold 62 356B Coupe Sold |
||
|
09-27-2014, 05:24 PM
|
|
|
Carmagic.us
Join Date: Feb 2007
Location: Virginia
Posts: 2,113
|
__________________
For BA7s Dash LED, and External Marker LED go to carmagic.us - Now Luftgekühlt Emblems |
||
|
09-27-2014, 05:30 PM
|
|
|
Heck, I’m only 5 not 71!
|
1980SC Gauges.
The best way to wire back the gauges would be to use a schematic and perform a continuity test from point to point for each wire. other than that a picture is worth a thousand words. Fuel/oil level and temp/oil pressure  Clock and speedometer, two contacts on the speedometer don't have the wires attached in the picture they are  (one brown/red wire goes to contact 31b and other brown/red wire is tied to a brown wire that goes to - contact) The brown/red wires are reversible and not contact specific. tachometer 
__________________
Pat Henry Targa80 1980SC Targa (Mocha Brown) Last edited by targa80; 09-27-2014 at 06:17 PM.. |
||
|
09-27-2014, 06:14 PM
|
|
930
