![]() |
|
|
|
Registered User
|
![]()
I'm replacing the Momo wheel in my car with the stock 3 spoke steering wheel. Can anyone here tell me what size connector I need for the horn pad? I'm looking for the connector to the little tab on the horn pad. Thanks in advance.
__________________
13 Boxster 85 Targa-sold 99 Boxster-sold 88 Targa-sold 84 Cab-totaled |
||
![]() |
|
Registered
|
Do you mean the electrical connection?
__________________
Karl ~~~ Current: '80 Silver Targa w /'85 3.2. 964 cams, SSI, Dansk 2 in 1 out muf, custom fuel feed with spin on filter Prior: '77 Copper 924. '73 Black 914. '74 White Carrera. '79 Silver, Black, Anthracite 930s. |
||
![]() |
|
Registered
Join Date: Jan 2007
Posts: 2,370
|
If you are going back to sotck a lot of momo hubs had to utilize the original horn part and it should be held in with 3 screws on the bottom of the momo hub and you just take it off and put it on your 3 spoke steering wheel as they have a built in hub.
|
||
![]() |
|
Registered User
|
![]()
I was trying to find out what electrical connection I need
__________________
13 Boxster 85 Targa-sold 99 Boxster-sold 88 Targa-sold 84 Cab-totaled |
||
![]() |
|
Registered
|
Female spade connector
|
||
![]() |
|
Registered
|
__________________
Karl ~~~ Current: '80 Silver Targa w /'85 3.2. 964 cams, SSI, Dansk 2 in 1 out muf, custom fuel feed with spin on filter Prior: '77 Copper 924. '73 Black 914. '74 White Carrera. '79 Silver, Black, Anthracite 930s. |
||
![]() |
|
![]() |